EnduroShield Warranty Registration

NOTE: The above code is only an example. Please use the code shown on your blue warranty label.

CARE INSTRUCTIONS

To clean glass coated with EnduroShield, rinse regularly with water, and squeegee dry after each use. We recommend the EnduroShield Professional Squeegee! To keep your glass looking new, it needs to be cleaned each week using a damp microfibre cloth and a mild liquid dish soap to remove soap scum, dirt, and grime from the glass. For areas with hard water or minerals a build-up may occur on the coating. Mix a solution of white vinegar & water (1 part vinegar to 3 parts water) and spray it on the affected area. Allowing this to soak on the glass for several minutes will dissolve the built up of minerals. If build up has been allowed to accrue for some time, repeat as necessary and/or apply undiluted vinegar. Never use polishing compounds, abrasive, harsh, rough, gritty, highly alkali, highly acidic, powder, or paste cleaners on EnduroShield treated glass!

WARRANTY INFORMATION

EnduroShield makes cleaning easier and faster by creating a true water & oil repellent surface. PCT Global Pty Ltd warrants that EnduroShield will remain water repellent (bead angle of greater than 70 degrees) for a period of 10 years from the date of the receipt provided by your dealer.

CONDITIONS

EnduroShield must have been applied by a factory-trained technician (or representative) and maintained as per the care instructions to validate the warranty. Any warranty claim requires the end consumer to have registered the warranty within a reasonable time after installation, be in possession of the original label, and possess the original invoice stating EnduroShield application, and date of installation.

WARRANTY QUESTIONS or CLAIMS

If, within the warranty period and meeting the above conditions, you feel your glass is no longer water repellant, please send an email to sales@enduroshield.com and provide a brief explanation of the problem along with your Name, Address, Date of Installation, Telephone Number, and Warranty Code. PCT Global Pty Ltd reserves the right to inspect the glass to determine application of the coating and correct maintenance in accordance with the manufacturer's instructions. If it is determined that a treated area is no longer water repellant, PCT Global Pty Ltd will gladly provide replacement EnduroShield in an amount determined to be adequate to re-coat the unprotected area.

Note: This warranty does not cover any glass or hardware, but only the EnduroShield coating.